American Geophysical Union Become an AGU Member
Subscribe to AGU Journals		 AGU Home AGU Publications

Read Full Article (file size: 3646675 bytes)    Cited by

JOURNAL OF GEOPHYSICAL RESEARCH, VOL. 112, C04004, doi:10.1029/2006JC003746, 2007

Subtidal flow structure at the turning region of a wide outflow plume

Arnoldo Valle-Levinson

Department of Civil and Coastal Engineering, University of Florida, Gainesville, Florida, USA


Kristine Holderied

Kasitsna Bay Laboratory, NOAA, Homer, Alaska, USA


Chunyan Li

Coastal Studies Institute, Louisiana State University, Baton Rouge, Louisiana, USA


Robert J. Chant

Institute of Marine and Coastal Sciences, Rutgers University, New Brunswick, New Jersey, USA


Abstract

A series of underway current velocity profiles and near-surface temperature and salinity measurements were combined with temperature and salinity profiles to characterize the subtidal flow structure at the turning region of a wide plume, the Chesapeake Bay outflow plume. In this context, “wide” refers to the ratio of lateral plume expansion to internal radius of deformation being greater than one. Observations were obtained in September and November of 1996 and in February and May of 1997 with the idea of capturing the variability in forcing conditions typically associated with these seasons. However, regional precipitation patterns yielded similar buoyancy forcing conditions for the four surveys and among the wettest years on record. This buoyancy forcing produced a well-delineated outflow plume that separated from the coast on its way out the estuary. The plume separation acted in conjunction with frictional effects to delineate an inshore front, in addition to the customarily described offshore front. The outflow plume was markedly constrained by the Chesapeake Channel, which was also the main conduit of shelf waters toward the estuary. The bathymetric influence was also evident in the surface salinity field, the mean flows and the volume fluxes. The offshore extent of the plume was found between the scale predicted by geostrophic dynamics (internal Rossby radius) and that predicted by cyclostrophic dynamics. Such offshore extent was most likely linked to the plume interactions with the bathymetrically steered up-estuary flow. This was corroborated by an analytical solution that explored the dynamical balance among pressure gradient, Coriolis accelerations and friction. In addition to being influenced by bathymetry, the Chesapeake Bay outflow plume was modified by local and remote effects related to atmospheric forcing.

Received 5 June 2006; accepted 20 November 2006; published 6 April 2007.

Keywords: plume; bathymetric effects; water exchange.

Index Terms: 4562 Oceanography: Physical: Topographic/bathymetric interactions; 4235 Oceanography: General: Estuarine processes (0442); 4508 Oceanography: Physical: Coriolis effects; 4217 Oceanography: General: Coastal processes; 4203 Oceanography: General: Analytical modeling and laboratory experiments.

Read Full Article (file size: 3646675 bytes)    Cited by

Citation: Valle-Levinson, A., K. Holderied, C. Li, and R. J. Chant (2007), Subtidal flow structure at the turning region of a wide outflow plume, J. Geophys. Res., 112, C04004, doi:10.1029/2006JC003746.